September 02, 2020
Needle bearing cleaning and inspection is very necessary
If you want to know more about it, you can contact us, and we will give you a
detailed introduction based on what you want to know. Do you know how to clean
after use? Needle bearing cleaning and inspection is very necessary, so that it
is very convenient for us to use in the future, then let us take a look at the
cleaning method of stamping needle roller bearings, I hope everyone can give us
the following The content has some understanding, so let's take a look.
During
hot oil cleaning, the temperature of the oil should not exceed 20°C. The sinking
of the bottom will cause overheating and reduce the hardness. The needle bearing
should be hung in the oil pan. . Due to the long time of use, when cleaning the
needle roller bearings of the centripetal spherical stamping parts of the old
motor or the imported motor, the balls, the ball frame, and the inner ring
should be rotated laterally from the outer ring and then immersed in hot oil.
Because we are a manufacturer specializing in the production of needle roller
bearings and other equipment, and thank you for your strong support to our
company, our company's needle roller bearings and other products are hot-selling
products, so we welcome your visit. In summary, everyone should have some
knowledge of our introduction. Open the cleaning, and wipe the cleaned needle
bearing with a clean cloth.
I don’t know if you have any simple
understanding, like the needle roller bearing parts we often use. When cleaning
cylindrical roller needle roller bearings, the rollers, ball cage, inner ring
and outer ring should also be separated. Then put the needle roller bearings in
cleaner kerosene and scrub them with a soft brush. If using an open flame to
heat directly, care should be taken to prevent the oil from burning.   
We
often see some mechanical equipment parts in our lives. Soak the needle roller
bearings in kerosene for 5-10 minutes, pinch the inner ring with one hand and
rotate the outer ring with the other hand, the dry oil or anti-rust paste on the
needle roller bearings will fall off. When cleaning the radial spherical ball
needle roller bearings and Wholesale
non-standard bearings suppliers short cylindrical roller needle roller
bearings, the balls, ball cage, inner ring and outer ring should be removed
Posted by: Chinabeltkit at
01:54 AM
| No Comments
| Add Comment
Post contains 407 words, total size 3 kb.
11kb generated in CPU 0.01, elapsed 0.0437 seconds.
35 queries taking 0.0362 seconds, 48 records returned.
Powered by Minx 1.1.6c-pink.
35 queries taking 0.0362 seconds, 48 records returned.
Powered by Minx 1.1.6c-pink.