October 29, 2020
The above is the detailed answer provided by Bearing
Needle roller bearings are burned. If you need more information, please continue
to pay attention to the company website, we will continue to serve you! It is
recommended that when the bearing is used, attention should be paid to the
installation, lubrication, clearance and other links to be as accurate as
possible and in place, so as to reduce the bearing burn and prolong the service
life of the bearing.
The three major China Clutch
Release Bearing causes of bearing burns will lead to bearing burns. The
second cause of bearing burns is the excessive load of the bearing; the speed of
the bearing is too high; the clearance of the bearing is too small; water or
other foreign matter invades. The race wheels, rolling elements and cages of
imported bearings will rapidly heat up during rotation until they are
discolored, softened, welded and damaged. The above is the detailed answer
provided by Bearing.
One of the reasons for bearing burns is
due to poor lubrication of the bearing. Irregular lubricants may be used, or too
much or too little lubricant is not correct. Generally speaking, there are
three points: poor lubrication of the bearing; excessive load of imported
bearings; poor precision of the shaft and bearing box are the reasons for the
bearing burns. The following is a detailed introduction to the reasons for the
bearing burns. The causes of bearing burns are the poor accuracy of the three
shafts, the bearing housing, and the large shaft deflection
Posted by: Chinabeltkit at
07:50 AM
| No Comments
| Add Comment
Post contains 262 words, total size 2 kb.
10kb generated in CPU 0.0052, elapsed 0.0208 seconds.
35 queries taking 0.0165 seconds, 48 records returned.
Powered by Minx 1.1.6c-pink.
35 queries taking 0.0165 seconds, 48 records returned.
Powered by Minx 1.1.6c-pink.